Q. Where can I purchase VERSA-LOK^® Retaining Wall Systems?
A. Contact a VERSA-LOK producer for a list of local dealers or retailers. To locate a producer near you, go to the "Where to Buy" section on this web site.

Q. How are VERSA-LOK® units connected?
A. Units are connected using VERSA-TUFF non-corrosive pins. Two pins are used per unit–inserted through the front holes in the upper course units into rear slots in the lower course units.

Q. Should I use mortar between units?
A. No. All VERSA-LOK walls are mortarless! Units are dry stacked and aligned using VERSA-TUFF^® pins. Mortarless construction allows walls to remain somewhat flexible and accommodate minor earth movement (such as that caused by freeze/thaw cycles) without damage.

Q. Do VERSA-LOK walls require concrete footings below frost?
A. No. VERSA-LOK walls are installed on shallow, non-rigid leveling pads consisting of well-compacted gravel, crushed stone or coarse sand -- even in northern climates that experience freeze/thaw cycles. The flexible nature of the walls allows them to accommodate minor earth movement without damage.

Q. Can I install VERSA-LOK walls myself?
A. Yes. Many do-it-yourselfers discover solid, pinned VERSA-LOK systems are actually quite easy to install.

Q. Where can I find a professional VERSA-LOK installer?
A. Your local dealer should have a list of VERSA-LOK installation experts. To locate a dealer near you, go to the "Where to Buy" section of this web site.

Q. How tall can VERSA-LOK walls be built?
A. Generally, VERSA-LOK walls can be built to any height. However, factors such as wall height and soil loads should be carefully considered before determining how you construct your wall. Consult your local dealer if you have questions.

Q. Do I need to order special corner pieces for VERSA-LOK walls?
A. No. Corners, curves and steps may all be constructed using one unit — a major advantage to working with VERSA-LOK systems. Units may easily be modified using a hammer and masonry chisel or mechanical splitter, when necessary.

Q. What maintenance is necessary with VERSA-LOK walls?
A. None. Once constructed, VERSA-LOK walls provide a lifetime of virtually maintenance-free performance. Color is consistent throughout the units so natural wear-and-tear is not apparent.

Q. How do I finish the top of the wall?
A. Finish off your wall by placing VERSA-LOK cap units down securely with VERSA-LOK Concrete Adhesive. Front faces of caps may be placed flush, set back or slightly overhanging (recommended) the face of the wall.